< < Önceki Sayfaya Dön
6ES7392-1AJ00-0AA0 SIMATIC S7-300 Front Connector, 20pin
6ES7392-1AJ00-0AA0 SIMATIC S7-300 Front Connector, 20pin
6ES7392-1AJ00-0AA0 SIMATIC S7-300 Front Connector, 20pin

6ES7392-1AJ00-0AA0 SIMATIC S7-300 Front Connector, 20pin (6ES7392-1AJ00-0AA0)

Marka : Siemens
İndirim Oranı : %17 İndirim
Fiyat : €89,00(KDV Dahil)
İndirimli : €73,87(KDV Dahil)
TL Fiyat : ₺3.589,12(KDV Dahil)

SIMATIC S7-300, Front connector for signal modules with screw contacts, 20-pole

 
Favorilere Ekle
İstek Listeme Ekle
Karşılaştır
Fiyat Düşünce Haber Ver
Gelince Haber Ver
Tavsiye Et
Yorum Yaz
Satıcıya Soru Sor

 

 

General information
Product type designation Front connector
Ambient conditions
Ambient temperature during operation
● min. 0 °C
● max. 60 °C
Ambient temperature during storage/transportation
● min. -40 °C
● max. 70 °C
Accessories
belongs to product S7-300
connection method
Connection I/O signals
● Connection method Screw terminals
● Number of lines per connection 1; or combination of 2 conductors of up to 1.5 mm² (total) in a shared ferrule
Conductor cross-section in mm²
— Connectable cable cross-sections for massive cables, min. 0.25 mm²
— Connectable cable cross-sections for massive cables, min. 1.5 mm²
— Connectable cable cross-sections for flexible cables without end sleeve, min. 0.25 mm²
— Connectable cable cross-sections for flexible cables without end sleeve, max. 1.5 mm²
— Connectable cable cross-sections for flexible cables with end sleeve, min. 0.25 mm²
— Connectable cable cross-sections for flexible cables with end sleeve, max. 1.5 mm²
Conductor cross-section acc. to AWG
— Connectable cable cross-sections for massive cables, min. 24
— Connectable cable cross-sections for massive cables, min. 16
— Connectable cable cross-sections for flexible cables without end sleeve, min. 24
— Connectable cable cross-sections for flexible cables without end sleeve, max. 16
— Connectable cable cross-sections for flexible cables with end sleeve, min. 24
— Connectable cable cross-sections for flexible cables with end sleeve, max. 16
Wire end processing
— Stripped length of cables, min. 6 mm
— Stripped length of cables, max. 6 mm
— End sleeve acc. to DIN 46228 without plastic sleeve Design A, 5 mm to 7 mm long
— End sleeve acc. to DIN 46228 with plastic sleeve Design E, up to 6 mm long
Mounting
— Tool Screwdriver, conical design, 3 mm to 3.5 mm
— Tightening torque, min. 0.4 N·m
— Tightening torque, max. 0.7 N·m
Dimensions
Width 23 mm
Height 131 mm
Depth 36 mm
Weights
Weight, approx. 70 g

 

cultureSettings.RegionId: 0 cultureSettings.LanguageCode: TR
Çerez Kullanımı

Sizlere en iyi alışveriş deneyimini sunabilmek adına sitemizde çerezler(cookies) kullanmaktayız. Detaylı bilgi için Kvkk sözleşmesini inceleyebilirsiniz.